skip to Main Content

Drift Punches

Manufactured from selected carbon steel, these have a single piece construction. Punches are accurately hardened and tempered for increased working life. The working ends are machine ground with the body in premium powder coated finish.

Drift Punches are ideal for lining up holes in 2 or more pieces of metal and for drawing pins through various assemblies. These are also referred to as “Alignment Punches”.

Description

Ordering Information

Cat. Nr. Ordering Nr. Tip Diameter (D) Stock Size Overall Length (L)
Inch mm Inch mm Inch mm
 DFP/HD/3-32 25800 3/32 2.5 5/16 8 8 200
 DFP/HD/1-8 25801 1/8 3 5/16 8 8 200
 DFP/HD/5-32 25802 5/32 4 3/8 10 9 225
 DFP/HD/5-32/SPL 25822 5/32 4 1/2 12 10 250
 DFP/HD/3-16 25803 3/16 5 1/2 12 10 250
 DFP/HD/3-16/SPL 25820 3/16 5 5/16 8 10 250
 DFP/HD/7-32 25804 7/32 5.5 1/2 12 10 250
 DFP/HD/7-32/SPL 25823 7/32 5.5 3/4 19 17.3/4 450
 DFP/HD/1-4 25805 1/4 6 5/8 16 12 300
 DFP/HD/1-4/SPL 25821 1/4 6 3/8 10 10 250
 DFP/HD/5-16 25806 5/16 8 3/4 19 12 300
 DFP/HD/3-8 25807 3/8 9.5 3/4 19 15 375
 DFP/HD/3-8/SPL 25824 3/8 9.5 5/8 16 10 250
 DFP/HD/1-2 25808 1/2 12 7/8 22 18 450
 Sets
 DFP/HD/7/ST 25809  A set of 7 Drift Punches in sizes 1/8″ (3 mm), 5/32″ (4 mm), 3/16″ (5 mm), 7/32″ (5.5 mm), 1/4″ (6 mm), 5/16″ (8 mm) &

 

Back To Top