skip to Main Content

Center Punches – Round Headed

Centre Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.

Description

Centre Punches are manufactured from selected carbon steel. These are accurately hardened and tempered so that the point will withstand continuous use and the striking end will not splinter. These are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill points.
The working tips are centered and ground to the correct angle (90° included angle) for increased efficiency in marking. The striking end is chamfered to prevent breakage.

Ordering Information

Centre Punches — Round Head [No. 251]
Single piece construction with round shank and round striking head. The knurling is clean and well cut to provide a positive finger grip. This range of punches have a rust inhibiting black oxide finish
Cat. Nr. Ordering Nr. Point Size (P) Body Diameter Overall Length (L)
Inch mm Inch mm Inch mm
 CP/1-16 25100 1/16 1.5 1/4 6 3 75
 CP/5-64 25101 5/64 2 5/16 8 4 100
 CP/3-32 25102 3/32 2.5 5/16 8 4 100
 CP/1-8 25103 1/8 3 5/16 8 4 100
 CP/9-64 25104 9/64 3.5 5/16 8 4 100
 CP/5-32 25105 5/32 4 3/8 10 4 100
 CP/3-16 25106 3/16 5 3/8 10 4 100
 CP/7-32 25107 7/32 5.5 3/8 10 4 100
 CP/1-4 25108 1/4 6 7/16 11 5 125
 CP/1-4/SPL 25111 1/4 6 1/2 13 5 125
 Sets
 CP/5/ST 25109  A set of 5 Centre Punches in sizes 1/16″ (1.5 mm), 5/64″ (2 mm), 3/32″ (2.5 mm), 9/64″ (3.5 mm) & 5/32″ (4 mm)
 packed in a vinyl pouch
 CP/5/1-8/ST 25110  A set of 5 Centre Punches in sizes 1/16″ (1.5 mm), 5/64″ (2 mm), 3/32″ (2.5 mm), 1/8″ (3 mm) & 5/32″ (4 mm)
 packed in a vinyl pouch
 CP/8/WD/ST 25120  A set of 8 Centre Punches in sizes 1/16″ (1.5 mm), 5/64″ (2 mm), 3/32″ (2.5 mm), 1/8″ (3 mm) 9/64″ (3.5 mm), 5/32″
 (4 mm) 3/16″ (5 mm) & 7/32″ (5.5 mm) packed to a wooden box
Back To Top