skip to Main Content

Arch Punches

These punches are used for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic & other soft material

Special design of the cutting edge prevents jamming of material inside the punch. Cutting edge is induction hardened for extended working life

Description

Ordering Information

Arch Punches
As the name suggests, these have an Arch / Bell Type construction. They are larger in form, with long shaft for convenient holding. These are built in a range of different hole diameters all the way from 3/16″ (5mm) to 2.3/4″ (70 mm)
Cat Nr. Ordering Nr. Hole Diameter
Inch mm
 HPL/5/BEL 26400 3/16 5
 HPL/6/BEL 26401 1/4 6
 HPL/8/BEL 26402 5/16 8
 HPL/10/BEL 26403 3/8 10
 HPL/11/BEL 26404 7/16 11
 HPL/12/BEL 26405 1/2 12
 HPL/14/BEL 26406 9/16 14
 HPL/16/BEL 26407 5/8 16
 HPL/18/BEL 26408 23/32 18
 HPL/19/BEL 26409 3/4 19
 HPL/21/BEL 26410 27/32 21
 HPL/22/BEL 26411 7/8 22
 HPL/24/BEL 26412 15/16 24
 HPL/25/BEL 26413 1 25
 HPL/26 26326 1.1/64 26
 HPL/27 26327 1.1/16 27
 HPL/28 26328 1.3/32 28
 HPL/29 26329 1.1/8 29
 HPL/30 26330 1.3/16 30
 HPL/31 26331 1.7/32 31
 HPL/32 26332 1.1/4 32
 HPL/33 26333 1.5/16 33
 HPL/34 26334 1.11/32 34
 HPL/35 26335 1.3/8 35
 HPL/36 26336 1.13/32 36
 HPL/37 26337 1.15/32 37
 HPL/38 26338 1.1/2 38
 HPL/39 26339 1.17/32 39
 HPL/40 26340 1.9/16 40
 HPL/41 26341 1.5/8 41
 HPL/42 26342 1.21/32 42
 HPL/43 26343 1.11/16 43
 HPL/44 26344 1.23/32 44
 HPL/45 26345 1.25/32 45
 HPL/46 26346 1.13/16 46
 HPL/47 26347 1.27/32 47
 HPL/48 26348 1.7/8 48
 HPL/49 26349 1.15/16 49
 HPL/50 26350 2 50
 HPL/52 26352 2.5/64 52
 HPL/54 26354 2.5/32 54
 HPL/55 26355 2.3/16 55
 HPL/57 26357 2.9/32 57
 HPL/58 26358 2.19/64 58
 HPL/60 26360 2.3/8 60
 HPL/62 26362 2.15/32 62
 HPL/63 26363 2.1/2 63
 HPL/65 26365 2.9/16 65
 HPL/67 26367 2.21/32 67
 HPL/68 26368 2.2.-11/16 68
 HPL/70 26370 2.3/4 70
 Sets
 HPL/5/BEL/ST 26440  A set of 5 Bell type Arch punches in sizes 1/4″ (6 mm), 3/8″ (10 mm), 1/2″ (12 mm),
 5/8″ (16 mm) & 3/4″ (19 mm) packed in a vinyl pouch
 HPL/7/BEL/ST 26441  A set of 7 Bell type Arch punches in sizes 1/4″ (6 mm), 3/8″ (10 mm), 1/2″ (12 mm),
 5/8″ (16 mm), 3/4″ (19 mm),7/8″ (22 mm) & 1″ (25 mm) packed in a vinyl pouch
 HPL/7A/BEL/ST 26442  A set of 7 Bell type Arch punches in sizes 3/16″ (5 mm), 5/16″ (8 mm), 7/16″
(11 mm), 9/16″ (14 mm), 23/32″ (18 mm), 27/32″ (21 mm) & 15/16″ (24 mm) packed in
 a vinyl pouch
Back To Top